宝德德国先导式二位二通大流量比例阀描述

IM电竞

电话：021-39526589-8004

手机：17321056802 (微信)

邮箱：17321056802@163.com

企业QQ：2880626084

联系人：杨江玲

地址：上海嘉定区嘉涌路99弄6号楼713室。

Technical data Ori? ce DN 10, 13 and 20 mm Body material Brass, stainless steel on request Seal material FKM,

 others on request Media Neutral liquids Media temperature -10 to + 90 °C Ambient temperature Max. + 55 °C 

磁滞作用、高可再现性

± 10 % Power consumption 0.5 W (without valve)  Input signal 0 – 20 mA, 4 – 20 mA or 0 – 10 V

 Control valve for continuous control of liquids ? Low hysteresis and high repeatability 

利用 PWM 信号进行控制

 Type 1094 or Types 8623-2, 8624-2, 8625-2 Control electronics in a plug-on module

6223 型阀门可被作为调节元件使用，用于调节大液体量。

Technical data Ori? ce DN 10, 13 and 20 mm Body material Brass, stainless steel Seal material FKM Media

 Neutral liquids only, no air or gasses Media temperature 14°F to 194°F (-10°C to +90°C)  Ambient temperature 

Max. 131°F (+55°C) Port connection NPT 3/8, NPT 1/2, NPT 3/4, NPT 1 Required control-unit 

确保了良好的调整特性。阀门可密封关闭。重叠的线圈可简单更换。

 Input impedance 210 Ω (current input) 17 Ω (voltage input) Output signal PWM (pulse–width modulation)

 signal for valve control Ramp time  0 – 10 s, adjustable Monitor signal 1 mV  1 mA effective coil current Versions

 Variant M Variant H Plug–on module DIN rail mounting version Protection class Variant M Variant H (NEMA 4) when mounted on valve IP65 on valve IP00

 Power consumption See ordering chart Duty cycle Continuous rating Electrical connection

 Cable plug Type 2508 acc. to DIN EN 175301-803 Form A Protection class valve IP 65 with plug-on module 

or with cable plug on the valve Installation As required, preferably with actuator in upright position 

Hysteresis < 5% Repeatability < 1% FS Sensitivity < 1% FS Settling time (90%) < 200 ms Span 1:10

适合持续调节液体的调节阀

with actuator in upright position Hysteresis < 5% Repeatability < 1% FS Sensitivity < 1% FS Settling time (90%) < 200 ms Span 1:10

Type 1094 Control electronics in a plug–on module

先导式封闭式阀门

the ? ow of large amounts of liquids. Low hysteresis, high repeatability and good response sensitivity guarantee 

good positioning behaviour. The valve closes tight. The push-over coil is easy to replace. 

Continuous rating Electrical connection Tag connector according to DIN 43650 form A Protection class 

Valve IP65 with plug–on module or with cable plug on the valve Installation As required, preferably 

磁滞、高可再现性以及良好的反应灵敏度，

Port connection G 3/8, G 1/2, G 3/4, G 1 Viscosity Max. 21 mm2/s Operating voltage 24 V DC

Type 1094 Control electronics DIN–rail mounting version

Type 8623–2 to 8625–2 Plug–on controller

Technical data - electronic control unit Type 1094 Operation voltage 24 V DC Voltage tolerance ± 10 % Ripple 

? Control with PWM signal ? Servo-assisted, tight closing valve

 or for DIN–rail mounting Plug–on controller with display, set and actual value input Viscosity Max.

 21 cSt (21 mm2/s) Operating voltage 24 V DC Power consumption See ordering chart Duty cycle 

宝德德国先导式二位二通大流量比例阀描述