HYDAC单向节流阀基本信息，DRVP-06-01.X

概述：

with throttle spindle and turning knob mounted in subplate housing. 

HYDAC needle valves with reverse flow check are equipped

When the turning knob is screwed out, the flow rate is increased

The needle valve with reverse flow check DRVP-10 is a valve 

with throttle spindle and turning knob for influencing 

throttle spindles; e.g. for the velocity control of loaded consumers. 

the flow rate by means of an adjustable cross-section 

 - depending on viscosity and pressure. A check valve permits free flow

 in the other direction. Qmax = 60 l/min Pmax = 350 bar 

in one direction. There is free flow in the opposite direction.

Fine adjustment of the flow rate by means of specially formed 

特点：

An Allen set-screw locks the setting of the knob 

As an emergency drain for lowering a load

Spindle patented secured before complete loosening

For regulating the speed of loads

To release pressure from accumulator systems

For system-related damping in hydraulic circuits

minimal wear and extended service life

Optional nickel-plated version available (up to size 12)

For fine adjustment and shut-off of the flow

Choice of nine sizes ensures best possible adaptability to the system

Hardened and ground valve components to ensure 

HYDAC单向节流阀基本信息，DRVP-06-01.X